Looking to get into 3d and not spend a bundle. While not my style I do love flying the MXS, easy to fit in most cars takes a regular and most used lipo, 3S2200. The yellow and black colors make for those of us “Senior Pilots” easy to see. This 1100 mm model will do all its bigger brothers will do and for many is the go to plane to learn new maneuvers. Take offs and landings are a breeze as long as you don’t try to horse in the air or float in. Add power slowly till tail up then go for it. Snap rolls on take are a crowd pleaser. For those of us like myself and don’t need the thrill of 3D, the MXS fills the bill for just all around aerobatics, spins, rolls, loops, etc.. are performed with ease.
Designed for the Intermediate to advanced 3D pilot and built specifically for 3D Flight, the MSX is sure to please even the most capable of 3D pilots.
Built from super strong EPO foam, the receiver-ready MXS is ready glueless to assemble requiring only 10 screws to complete. Add your 4 channel receiver and 3S 2200mAh battery and you are ready to fly. Strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The powerful 35-36 1250Kv Outrunner, 40amp ESC, and 4 Metal Gear Digital servos are pre-installed and ready to fly out of the box. The preinstalled precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic maneuver desired. Extra long servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier & hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminum landing gear and large 2.5" wheels make grass takeoffs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy!
Painted in bright yellow and black, The new MXS is sure to get attention at the flying field. Easy to assemble, built tough, and 3D ready… Look no further than the New MXS from FMS Models!
|Approximate Assembly Time:||Less than 1 Hour|
|Approximate Flight Time:||5 minutes|
|Battery:||Li-Po 11.1V 2200mAh 35C|
|CG (Center of Gravity):||3.3–3.5 in (85–90mm) from leading edge|
|Flying Weight:||38.8 oz (1100g)|
|Length:||42.5 in (1080mm)|
|Minimum Required Radio:||4 Channel|
|Motor Size:||Brushless 3536-KV1250|
|Propeller Size:||11 × 5.5, 2-blade propeller|
|Servos:||4 × 9g digital metal gear|
|Wing Area:||478.7 sq in (30.8 sq dm)|
|Wingspan:||43.3 in (1100mm)|
Join Our Newsletter!